Posts for tag: air abrasion

By ental Solutions of Winter Haven
June 19, 2019
Category: Dental Procedures
Tags: air abrasion  
AirAbrasionOffersaMorePleasantDentalOfficeExperiencethanDrills

For years preparing teeth for fillings or other restorations has required the use of a drill. Although quite effective in removing decayed structure and preparing the tooth for bonding, it usually requires a local anesthetic. That and the noise it generates can be unsettling for many patients.

In recent years, a different type of technique known as “air abrasion” has increased in popularity among dentists. Known also as “particle abrasion,” the technique uses a stream of fine particles to remove decayed tooth structure and is less invasive than the traditional drill. Although the technology has been around since the mid-20th Century, recent developments in suction pumps that remove much of the dust created have made it more practical. It also works well with new natural-looking bonding materials used for tooth structure replacement.

The fine particles — usually an abrasive substance like aluminum oxide — are rapidly discharged through a hand-held instrument using pressurized air aimed at affected tooth areas. Decayed teeth structure is softer than healthier tissue, which allows air abrasion to precisely remove decay while not damaging the other.

Besides removing decay or abrading the tooth for bonding, air abrasion can also be used to minimize stained areas on surface enamel and to clean blood, saliva or temporary cements from tooth surfaces during dental procedures. It’s also useful for smoothing out small defects in enamel or aiding in sealant applications.

It does, however, have a few limitations. It’s not as efficient as the traditional drill with larger cavities or for re-treating sites with metal (amalgam) fillings. Because of the fine texture of the abrasive particles, affected teeth need to be isolated within the mouth using a rubber dam or a silicone sheet. High-volume suction must be continually applied to capture the fine particles before the patient swallows them or it fills the procedure room with a fine cloud of material.

Still, while air abrasion technology is relatively new, it has clear advantages over the traditional drill in many procedures. As advances in the technology continue, air abrasion promises to offer a more comfortable and less invasive experience in dental treatment.

If you would like more information on air or particle abrasion, please contact us or schedule an appointment for a consultation.

By ental Solutions of Winter Haven
May 30, 2019
Category: Dental Procedures
Tags: air abrasion  
AirAbrasionCouldbeaMorePleasantAlternativetotheDentalDrill

While it may not be one of your favorite features in the dental office, the dental drill is nevertheless necessary for treating problem teeth. It’s used primarily for removing decayed or damaged structure and preparing a tooth for fillings or other restorations.

Dental drills have been used for decades and are quite effective — but they have their drawbacks. Their rotating burrs often remove portions of healthy tooth structure along with decayed material. Friction from the drill action can cause discomfort, so local anesthesia is usually needed. Drills can also emit a high-pitched machine noise that’s unsettling to many patients.

There’s a growing alternative to the drill, known as air abrasion. Although the technology has been around since the 1950s, the development of new suction pumps that capture the resulting dust from its use has made it more palatable as an option to the traditional drill.

Also known as particle abrasion, the technique uses a pressurized stream of fine particles (usually aluminum oxide, an abrasive powder) directed at teeth to wear away (abrade) the tooth’s structural surface. We can be quite precise in the amount of surface material removed, so it’s useful for diminishing stains or roughing the surface for bonding materials like composite resin. We’re also able to remove decayed material with very little impact on surrounding healthy structure, and you may not need anesthesia during the procedure.

While this quiet alternative to the noisier drill is quite versatile, it does have its limitations. It’s not that efficient for preparing larger cavities for restoration or for removing older amalgam fillings. The teeth to be treated must be carefully isolated to prevent the fine particle dust produced from being swallowed by the patient or spread into the air. High-volume suction equipment is a must or the procedure will create a “sandstorm” of particles in the room.

Still, for situations suited to it and with proper isolation measures, air abrasion can be effective and comfortable. If the technology continues to improve, the dental drill may soon become a relic of the past.

If you would like more information on procedures using air abrasion, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Air Abrasion Technology.”



Carlos A. Polo, D.D.S., M.S.  |   Jose G. Cruz, D.D.S.

863.877.1891
Hablamos Español

6390 Cypress Gardens Blvd.

Winter Haven, FL 33884

 

Archive:

Tags

Hablamos Español